|
|
C6246/1000 Lathe machine |
| Feature: |
|
|
|
| · Precision ground and supersonic frequency hardened bed ways is designed in double wall structure,giving super rigidity.The spindle system is high in rigidity and accuracy.The design of the main dribe is optimized and the gears in the headstock are precision ground.The noise of the machine is low. · There is no need for change gears.The machine can turn about 200 kinds of metric,whitworth,module and D.P. threads.An automatic stopping device is used to realize automatic stop for the machine of a certain length workpiece,which is safe and eliable apedal braking device providing quick and effective stop while operating. |
| HIGH PRECISION &HEAVY DUTY INDUSTRIAL LATHE |
| Model |
C6241×1000 |
C6241×1500 |
C6246×1000 |
C6246×1500 |
| Max.swing over bed |
Φ410mm（16"） |
Φ460mm(18") |
| Max.swing over cross slide |
Φ224mm(8 13/16") |
Φ274mm(10 3/4") |
| Max. swing over gap |
Φ640mm(25 1/8") |
Φ690mm(27 1/8") |
| Length of gap |
155mm(6 1/8") |
| Max.length of workpiece |
1000mm(40")/1500mm(60") |
| Width of bed |
300mm(11 13/16") |
| Spindle nose |
D1-6 |
| Spindle bore |
Φ58mm(2-1/4") |
| Taper of spindle bore |
M.T.#6 |
| Range of spindle speed |
12changes25-2000r/min |
| Max.travel of compound rest |
120mm(4 3/4") |
| Max.travel of cross slide |
290mm(11 3/8") |
| Leadscrew pitch |
metric 6mm |
| Max.section of tool |
25mm×25mm(1×1") |
| Range of longitudinal feeds |
42kinds 0.031-1.7mm/rev (0.0011"-0.0633"/rev) |
| Range of cross feeds |
42kinds 0.014-0.784mm/rev (0.00033"-0.01837"/rev) |
| Metric threads range |
41kinds 0.1-14mm |
| Inch threads range |
60kinds 2-112 T.P.I. |
| Diametrical pitches range |
50kinds 4-112D.P. |
| Module piches rang |
34kinds 0.1-7 M.P. |
| Dia. of tailstock sleeve |
60mm(2 5/16") |
| Travel of tailstock sleeve |
120mm(4 3/4") |
| Morse taper of tailstock sleeve |
M.T.#4 |
| Power of main motor |
4kw(5.4HP),optional 5.5kw(7.5HP)3PH |
| Power of coolant pump |
40w |
| Standard Accessories： |
Optional Accessories： |
|
| ·3 Jaw Chuck |
·Taper Turning Attachment |
|
| ·Change Gears Set |
·Live Center |
|
| ·Chasing Dial Indicator |
Work Light |
|
| ·Reduction Sleeve |
Leadscrew Guard |
|
| ·Dead Centers |
Digital Readout |
|
| Full Length Splash Guard |
Quick Change Tool Post |
|
| Coolant System |
Chuck Guard |
|
| Brake System |
Digital Readout(2 Axis) |
|
| 4 Jaw Chuck |
Drill Chuck+Drill Arbor |
|
| Face Plate |
|
|
| Steady Rest |
|
|
| Follow Rest |
|
|
| Tool Box&Tools |
| This article is divided into
1
Page |
|
|
WebMail
