Model TM807A Cylinder Boring ＆ Honing Machine is mainly used for maintaining the cylinder of motorcycle, etc . Place the cylinder to be bored under the base plate or on the plane of the base of the machine after the center of the cylinder hole is determined, and the cylinders fixed, maintenance of boring and honing can be carried out. The cylinder of the motorcycles with diameters ф39-72mm and depths within 160mm can all be bored and honed .If the suitable fixtures are fitted ,other cylinder bodies with corresponding requirements can also be bored and honed.
.
| specifications |
TM807A |
| Diameter of boring ＆honing hole |
Ф 39-72mm |
| Max. boring ＆honing depth |
160mm |
| Rotational speed of boring spindle |
480r/min |
| Steps of variable speed of boring spindle |
1step |
| Feed of boring spindle |
0.09mm/r |
| Return and rise mode of boring spindle |
manual operated |
| Rotational speed of honing spindle |
300r/min |
| Honing speed of honing spindle |
6.5m/min |
| Electric motor |
Power |
0.75kw |
| Rotational speed |
1440r/min |
| Voltage |
220v or 380v |
| Frequency |
50Hz |
| Centering range of centering device |
Ф 39-46mm Ф46-54mm
Ф 54-65mm Ф 65-72mm |
| Overall dimensions (L x W x H) |
680 x 480 x 1160mm |
| Weight of main machine (approx) |
170kg | This article is divided into
1
Page |
WebMail
