Cylinder boring & honing machine TM807
cylinder honing machine
cylinder boring machine
hoing machine
Cylinder Boring & Honing Machine is mainly used for maintaining the cylinder of motorcycle. etc. Place the cylinder to be bored under the base plate or on the plane of the base of the machine after the center of the cylinder hole is determined, and the cylinder is fixed, maintenance of boring and honing can be carried out .The cylinder of the motorcycles with diameters φ39~72 mm and depths within 160 mm can all be bored and honed, If the suitable fixtures are fitted, other cylinder bodies with corresponding requirements can also be bored and honed.
-
Main specifications
|
Model |
TM806 |
TM807 |
|
Diameter of boring & honing hole |
Φ39-Φ65 mm |
Φ39-Φ72 mm |
|
Max. boring & honing depth |
180 mm |
160 mm |
|
Rotational speed of boring spindle |
504,357 r/min |
480 r/min |
|
Step of variable speed of boring spindle |
2 steps |
1 step |
|
Feed boring spindle |
0.09 mm/r |
0.09 mm /r |
|
Return and rise mode of boring spindle |
Manual operated |
Manual operated |
|
Rotational speed of honing spindle |
303 r/min |
300 r/min |
|
Honing spindle feeding speed |
6.5 m/min |
6.5 m/min |
|
Electric motor |
Power |
0.75 Kw |
0.75 Kw |
|
Rotational speed |
1400 r/min |
2800 r/min |
|
Voltage |
220 / 380 V |
220 / 380 V |
|
Frequency |
50 / 60 Hz |
50 / 60 Hz |
|
Overall dimensions (L×W×H) |
500×400×1070 mm |
680×480×1160 mm |
|
Packing dimensions(L×W×H) |
630×560×1150 mm |
700×600×960 mm | This article is divided into
1
Page |
WebMail
