Tel:

J23series general open back & inclinable press

J23series general open back & inclinable press 

◆    Adopts horizontally placed crankshaft.

◆    Rigid rotated bond clutch.

◆    JD23-63A/80A adopts dual rotated bond structure to overcome rebound of punching effectively.

◆    Manual shut height adjustment with scale display.

◆  The type with “A” equipped with emergency stop device,which could make the slide stop  at 0°～135°area and equipped with light curtain protector as well.

 

		JC23-6.3	J23-10B	J23-16	J23-16B	J23-25A	JG23-35A
Capacity	kN	63	100	160	160	250	350
Nominal Force	mm	3	4	5	5	5	5
Slide Stroke	mm	35	60	55	70	80	100
SPM	min-1	170	145	125	125	60	53
Max. Die Height	mm	110	130	160	170	180	180
Die Height Adjustment	mm	30	35	45	45	70	75
Between Slide Center & Frame	mm	110	130	160	170	210	200
Bolster (FB×LR)	mm	200×310	240×360	300×450	320×480	400×600	380×610
Bolster Opening (Up Hole Dia.×Dpth×Low Hole Dia.)	mm	Φ60	Φ120×20 ×Φ100	Φ100	Φ100	Φ120	Φ130
Bolster Thickness	mm	40	50	40	60	70	70
Bolster Opening (Dia.×FB×LR)	mm	Φ140×110×160	Φ130×90 ×180	Φ210×160 ×240	Φ210×160 ×240	Φ180×130 ×260	Φ180×130 ×290
Slide Area (FB×LR)	mm	120×140	150×170	180×200	180×200	210×250	210×250
Shank Hole (Dia.×Dpth)	mm	Φ30×55	Φ30×55	Φ40×60	Φ40×60	Φ40×70	Φ40×60
Max. Inclined Angle	°	30°	25°	25°	25°	25°	25°
Between Columns	mm	150	180	220	220	260	300
Motor Power	kW	0.75	1.1	1.5	1.5	2.2	3
Outline Size (FB×LR×H)	mm	780×610 ×1505	915×700 ×1690	1150×900 ×1910	1150×900 ×1910	1325×990 ×2140	1490×1080 ×2200
Net Weight	kg	360	600	1080	1080	1900	2440

 

		JG23-40A	JC23-63A	JD23-63A	J23-80A	JD23-80A
Capacity	kN	400	630	630	800	800
Nominal Force	mm	6	8	8	9	9
Slide Stroke	mm	120	120	120	130	130
SPM	min-1	55	50	50	45	45
Max. Die Height	mm	220	270	270	290	290
Die Height Adjustment	mm	80	80	80	100	100
Between Slide Center & Frame	mm	260	260	260	270	300
Bolster (FB×LR)	mm	480×710	480×710	480×710	520×860	580×860
Bolster Opening (Up Hole Dia.×Dpth×Low Hole Dia.)	mm	Φ220×25 ×Φ180	Φ220×45 ×Φ180	Φ200×45 ×Φ180	Φ200×45 ×Φ180	Φ200×45 ×Φ180
Bolster Thickness	mm	80	90	90	100	100
Bolster Opening (Dia.×FB×LR)	mm	Φ200×150 ×300	Φ250×200 ×340	Φ250×200 ×340	Φ250×200 ×340	Φ280×220 ×380
Slide Area (FB×LR)	mm	270×320	280×320	280×320	280×380	280×380
Shank Hole (Dia.×Dpth)	mm	Φ50×70	Φ50×80	Φ50×80	Φ60×75	Φ60×75
Max. Inclined Angle	°	25°	25°	25°	20°	20°
Between Columns	mm	300	350	350	410	410
Motor Power	kW	4	5.5	5.5	7.5	7.5
Outline Size (FB×LR×H)	mm	1600×1180 ×2310	1810×1350 ×2640	1885×1350 ×2670	1810×1410 ×2790	1990×1410 ×2945
Net Weight	kg	3180	4000	4970	4790	5970