3-phase with two-voltage collocation
Single-speed motor, 12 step gear shift
Unload tools device and coolant, fender device
Milling function
Strength spindle, large diameter column
Worktable could be rotated and could be inclined+/-45 degree
Motor driven or manual lifting of worktable
Digital readout for the display of speed and cutting depth
Micro feed is available
Trochoid lubrication pump
Both mechanical and electromagnetism clutch transmission feed measures are available
Superior quality of gears with harded and lapped gears of surface
Main motor with break
Technical data
|
| Max. drilling capacity |
50 mm |
| Max. face milling capacity |
80 mm |
| Max. tapping capacity |
32 mm |
| Table total/effective surface |
580 x 460 mm / 445 x 435 mm |
| Table vertical travel |
530 mm |
| Table tilting |
+/- 45° |
| Diameter of column |
180 mm |
| Max. spindle-table distance |
600 mm |
| Spindle-base distance |
1185 mm |
| Spindle stroke |
200 mm |
| Distance from spindle axis to column |
360 mm |
| Spindle taper |
MT 4 |
| Range of spindle speed |
50 - 1500 r/min / stepless |
| Spindle feed steps |
4 |
| Spindle feed range |
0,1 / 0,2 / 0,3 / 0,4 mm/r |
| Mode of spindle feed |
electromagnetic |
| Motor |
3 kW / 230/400 V |
| Dimensions |
1035 x 680 x 2300 mm |
| Weight |
655 kg |
This article is divided into
1
Page |
WebMail
