This model is suitable for cleaning or reinforcing various medium and large batch forged piece, casting and sheet metal parts but also more suitable for frosting surface after rust removal and increasing adhesive force of spraying.
1、 This machine adopts no-pit structure which is easy to be mounted and thus reduce investment cost.
2、 Compact structure, high efficiency, good cleaning quality, reliable and safe operation, steady running.
3、 The cleaning chamber is wear-resisting and impact resistant with good intensity by adopting High Chromium Manganese plate.
4、 Double-hook structure, which can work independently, neither influencing the other, thus improve production efficiency. The hook adopts planet principle with simultaneous rotation and revolution. The processed work piece doesn’t have male and female face.
5、 Two-stage dust removal (cyclone dust removal and bag filter), great air volume, the dust is completely filtered, and the air discharge is in compliance with environment protection standard.
6、 Precise assembly, high-quality bearing, Abrasion resistant rubber belt lighten the collision of work pieces, and low noise of motor running.
Features & benefits:
Two or more direct-drive,8 bladed blast wheel assembly ,T-frame,D-flange, wheel drive motor based on your productivity and workpiece requirement
Real access door provided unrestricted access to the mill, elevator belt, lower elevator pulley, reclaim screw and lower screens.
Manganese steel roof liners and barrel head seals with cast, long time barrel head liners and in-line liners.
screw conveyor returns abrasive and containments to the bucket elevator, the to the air wash separator.
Air wash separator with overflow to lower storage hopper.
Air cylinder operated butterfly valve for positive abrasive flow control..
Manual open or cylinder controlled chamber door
This machine can be controlled by PLC, the operation is easy and reliable
Electrical:
Primary power requirements: 380 volts,50HZ,3phase
Control panel equipped with push buttons and pilot lights, emergency stop button, and mainline disconnect.
Safety Features:
Timed operation between the abrasive control valve and the door
Limit switch on the loading and rear access door to prohibit the wheel from starting when the door is opened.
Safety Signs
Options:
Programmable logic controls ( PLC )
Variable speed wheel motor
Dust collector can be plated bag with vibrating mechanism or hand shaking or pulse valve
Dust collector can be cartridge filter with pulse valve
Manual open or cylinder controlled chamber door (mechanical and or hydraulic operation)
Two or more direct-drive,8 bladed blast wheel assembly , wheel drive motor based on your productivity and workpiece requirement
No. |
descprtion |
unit |
Q378C |
1 |
Machine size |
mm |
4844x3850x5156 |
2 |
Single hook limit weight |
kg |
1000 |
3 |
Shot blasting capacibility |
kg/min |
2x250 |
4 |
Separating capacilibity |
T/h |
30 |
5 |
Bucket elevating capacilibity |
T/h |
30 |
6 |
Size of the workpiece |
mm |
Dia.800x1200 |
7 |
Ventilation volume |
m3/h |
8300 |
8 |
Total power |
kw |
37.04 |
This article is divided into
1
2
Page