0.27M3 single gun manual shot blaster
Blasting Pot Diameter |
600mm |
Equipment Height |
1400mm |
Blasting Pot Volume |
0.27M3 |
Nozzle Diameter |
6.5mm |
Blasting Gun Quantity |
1 |
Blasting Hose Length |
18m |
Blasting Area per |
10~25m2/h |
Surface Quality |
Sa2.5-Sa3.0 |
Compressed Air Consumption |
≥3m3 |
Compressed Air Pressure |
0.6~0.8Mpa |
Control Type |
Manual Pneumatic Control |
Character |
Simple Structure, Low Failure Rate
Low Cost, Movable and Less Consumption Parts |
|
|
|
0.5M3 single pneumatic control shot blaster
Blasting Pot Diameter |
750mm |
Equipment Height |
1700mm |
Blasting Pot Volume |
0.5M3 |
Nozzle Diameter |
6.5mm |
Blasting Gun Quantity |
1 |
Blasting Hose Length |
18m |
Blasting Area per |
15~35m2/h |
Surface Quality |
Sa2.5-Sa3.0 |
Compressed Air Consumption |
≥3m3 |
Compressed Air Pressure |
0.6~0.8Mpa |
Control Type |
Manual Pneumatic Control |
Character |
Simple Structure, Low Failure Rate
Low Cost, Movable and Less Consumption Parts
According to requirements, the operator can choose one or two blasting guns to do blasting machine |
1M3 double gun Pneumatic control shot blaster
Blasting Pot Diameter |
900mm |
Total Height |
1860mm |
Blasting Pot Volume |
1M3 |
Nozzle Diameter |
10mm |
Blasting Gun Quantity |
2 |
Blasting Area per |
15~35m2/h×2 |
Blasting Hose |
2×32*2S*20m |
Surface Quality After Blasting |
Sa2.5-Sa3.0 |
Compressed Air Consumption |
≥6.5 m3/min×2=13m3/min |
Compressed Air Pressure |
0.6~0.8Mpa |
Control Type |
Remote Control,
Electric/Pneumatic Control |
Character |
Inspect the abrasive volume in sand blasting machine by
top and bottom level indicator to command shots control
valve feed abrasive into blasting pot. During this process
flow, it does not need to stop the sand blasting machine
and compressed air to achieve continuously working. Thus
it improves at least 30% productivity. |
Blasting Nozzle
The nozzle is made of Carbide Alloy (Tungsten). The diameter of nozzle which the customer will choose should
according to practical situation. It has characters of high efficiency, long life service and easy maintenance.
S/N |
Nozzle Diameter
mm |
Length
mm |
Air Consumption
m3/min |
Grits Consumption
kg/h |
Productivity
m2/h |
1 |
Φ6.5 |
130 |
3.9 |
1150 |
15-35 |
2 |
Φ8 |
155 |
4.1 |
1300 |
15-35 |
3 |
Φ9 |
165 |
4.9 |
1450 |
18-40 |
4 |
Φ10 |
170 |
6.1 |
1600 |
18-40 |
5 |
Φ11 |
170 |
8.8 |
1720 |
18-40 |
6 |
Φ12 |
175 |
9 |
1910 |
18-40 |
7 |
Φ13 |
175 |
11 |
2010 |
25-45 |
8 |
Φ14 |
175 |
13.5 |
2150 |
25-45 |
Remark: The nozzle is divided into hard alloy, ceramics, boron carbide three kinds according to different material. The diameter of nozzle which the customer will choose should according to practical situation. It has characters of high efficiency, long life service and easy maintenance
2.1 Pneumatic PVR Pinch-Tube Valves (Abrasive Control Valve)
Pneumatic PVR Pinch-Tube Valve is the key part of sand blasting machine. Its service life, easy operation and maintenance have direct affection on use and efficiency of sand blasting machine.
2.3 Blasting Hose and Fast Joints
The blasting hose adopts 1/4" fabric reinforced hose which guarantees the shots/grits volume during blasting and service life of blasting hose. All joints adopt fast joints with safety pins which can be assembled easily and safely.
2.4 Protective Clothes, Helmet and Breath Filters
Because the working condition of blasting is very bad and dangerous, the operator must wear qualified breath protection device to guarantee safety of blasting and provide fresh air after filtering for operators. The breath protection device includes breath filtering system and protective helmet.
PPE (Personal Protective Equipment)
The air conditioning protective mask is special for operators in blasting booth. It adopts compressed air from outside
and filter. It can remove peculiar smell and oil containments and provide clean air for operators. The helmet is made
of glass fiber reinforced plastics and light.
The air conditioning protective maks is comprised of air filters, temperature adjustment, dural helmet and clothes. The
air after filters will pass through temperature adjusting device (Temperature range 10~45C) and enter dural helmet. It will
make the operator feel that he is in good temperature, fresh air. In addition of good vision of helmet, it will improve the
working conditions for operators.
2.5 Wireless Remote Controller
1 blasting button, 1 blasting stop button, 1 jet button, 1 jet stop button, 1 start button, 1 E-STOP button.
Water-proof and dust-proof class reach IP65
Working temperature: -35°C~+80°C
Remote control distance: 50~100m
This article is divided into
1
Page |