Tel:

CW61128/148/168 /198/208

MODEL	CW61108	CW61128	CW61148	CW61168	CW61198	CW61208
Max workpiece weight	10吨
Max swing over bed	1080mm	1280mm	1480mm	1680mm	1980mm	2080mm
Max swing over cross slide	600mm	800mm	1000mm	1200mm	1500mm	1600
Center distance	2m 3m 4m 5m 6m 8m 10m 12m
Max swing over gap	1420mm	1620mm	1820mm	2020mm	2320mm	2420mm
Valid length of gap	600mm
Bed width	1100mm
Headstock
Spindle bore	∮130mm
Spindle taper	公制140#
Spindle speeds	3.15-315r/min或2-200r/mm或2.5-250r/mm.转数 种数：正21种，反12种
GEAR BOX-THREADS & FEEDS
Metric threads range	44种 1-120mm
Inch threads range	31种 1/4-24牙/时
Moudle threads range	45种 0.5-60mm
Diametral threads range	38种 1/2-56DP
Longitudinal feeds range	56种 0.1-12mm
Cross feed range	56种 0.05-6mm
Rapid feed:long/cross	1200mm/min,1800mm/min
TOOL POST
Distance between Center&Tool	48mm
Tool section	45*45mm
CARRIAGE
Cross slide travel	860mm
Compound rest travel	280mm
TAILSTOCK
Sleeve diameter	∮260mm
Sleeve taper	公制80#
Sleeve travel	300mm
MOTOR
Main drive motor	30kw
Coolant pump motor	0.15kw
Rapid feed motor	1.5kw
Tailstock motor	1.5kw
Center distance:Net weight.Dimention CW61148	2000 3000 4000 5000 6000 8000 10000 12000		18000kg 19000kg 20000kg 21000kg 22000kg 24000kg 26000kg 28000kg		5280*2200*2600 6280*2200*2600 7280*2200*2600 8280*2200*2600 9280*2200*2600 11280*2200*2600 13280*2200*2600 15280

Remark: the workpiece limit Load:10 TONS.

spindle bore 130mm,bed width 1100mm