CW61100B CW61125B CW61160B parallel lathes are suitable for turning or cast iron and steel workpieces, turning of non-ferrous metal parts of big or medium sizes. It can do external cylindrical surface turning, inner hole and end face turning. It can also turn various intemal and external metric,inch,module and diametrical pitch threads, the top slide can be used independenthy for turning of short taper.
These lathes are of high power,high rigidity and wide rotating speed range, so it can be used for high speed and strong force turning.
Main Struture
1.Bed with high rigidity
Casted in whole piece, box type internal structure, of high rigidity, with hardened guideway, TSF coated carriage to minimize the possibility of low speed stick-slip.
2.Main spindle with high rigidity and high accuracy
Spindle bearing of famous brand, spindle-box of heat-symmetrical structure to avoid spindle axis drifting, oil lubricating to minimize heat distortion. Spindle with three support structure to secure accuracy and increase rigidity, all gears quenched and tooth-ground to secure precise transmission and low noice. So the spindle is of low temperature rise, minimized heat distortion ,and long-term steady high accuracy.
Item |
Unit |
CW61100B |
CW61125B |
CW61160B |
Swing over bed |
mm |
1000 |
1250 |
1640 |
Swing over carriage |
mm |
615 |
865 |
1250 |
Maximum length of workpiece |
mm |
1500/3000/5000/6000/8000/10000/12000/14000/16000/18000 |
Maximum turning length |
mm |
1300/2800/4800/5800/7800/9800/11800/13800/15800/17800 |
Span of guideway |
mm |
755 |
Spindle nose |
mm |
A2-15(8XM22) |
Spindle bore |
mm |
130 |
130 |
130 |
Taper hole of spindle |
|
1:20/140 |
1:20/140 |
1:20/140 |
Number of forward turning speeds |
|
21 |
Number of reverse turning speeds |
|
12 |
spindle speeds(forward) |
r/min |
3.15-315 |
spindle speeds(reverse) |
r/min |
3.5-291 |
Number of feeds per revolution(longitudinal/transverse) |
|
56/56 |
Feed per revolution(Longitudinal) |
mm |
0.1-12(0.004"-0.473") |
Feed per revolution(Transverse) |
mm |
0.05-6(0.002"-0.236") |
Feed per revolution(Upper tool-post) |
mm |
0.025-3(0.001"-0.118") |
Number and range of metric thread |
|
44;1-120mm |
Number and range of inch thread |
|
31;28-1/4 |
Number and range of module thread |
|
45:0.5-60mm |
Number and range of diametrical pitch thread |
|
38:1/2-56DP |
Distance between spindle center-line and tool resting plane |
mm |
48 |
Section of tool shank |
mm |
□45 |
Tool post swing range |
° |
±90° |
Maximum travel of carrige |
mm |
1450/2950/4950/5950/7950/9950/11950/13950/15950/17950 |
Maximum travel of top slide |
mm |
300 |
Maximum travel of cross slide |
mm |
520(20") |
580(22") |
630(24") |
Tool post travel per turn of the dials of top or cross slide |
mm |
0.05(0.002") |
Rapid travel speed(longitudinal) |
mm/min |
3740 |
Rapid travel speed(Transverse) |
mm/min |
1870 |
Rapid travel speed(Top slide) |
mm/min |
935 |
Diameter of tailstock quill |
mm |
160(6") |
160(6") |
160(6") |
Travel of tailstock quill |
mm |
300(12") |
300(12") |
300(12") |
Taper hole of tailstock quill |
|
Morse 6 |
Morse 6 |
Morse 6 |
Main motor power |
kw |
22 |
22 |
22 |
Maximum weight of workpiece |
kg |
6000 |
6000 |
6000 |
Width |
mm |
2150 |
2150 |
2150 |
Height |
mm |
1700 |
1825 |
2150 |
Remark: the workpiece limit Load:6 TONS.can change into limit load 8TONS;
spindle bore 130mm,bed width 755mm
This article is divided into
1
Page |