Feature:
u Hardened and ground bed ways.
u 52mm spindle bore,cast iron machine stand
u 16 speeds all geared head stock.
u 3HP(2.4kW)three phase motor.
u Foot brake giving rapid braking.
u Emergency stop button equipped on the front of headstock.
u Jog button for easy gear engagement and inching spindle.
u Open type chip pan easily to remove chips.
u Extra safety switch shuts down machine automatically for changing belt or gear for threading cutting.
SPECIFICATION |
MODELS |
CM6241×1000 CM6241 X 1500 |
CAPACITY |
Swing over bed |
410mm(16") |
Swing over cross slide |
255mm(10") |
Swing in gap |
580(23") |
Length of gap |
250(10") |
Distance between centers |
1000mm(40") |
Center height |
20.5" |
Width of bed |
250(10") |
HEADSTOCK |
Spindle nose |
D1-6 |
Spindle bore |
52mm(2") |
Taper of spindle bore |
No.6Morse |
Range of spindle speed |
16 changes 45-1800r/min |
FEEDS AND THREADS |
Max.travel of compound rest |
102mm(4") |
Max.travel of cross slide |
210mm(8-1/4") |
Leadscrew pitch |
4T.P.I. |
Max.Section of tool |
20×20mm(13/16") |
Longitudinal feeds range |
0.05-1.7mm/rev(0.002"-0.067"/rev) |
Cross oeeds range |
0.025-0.85mm(0.001"-0.0335"/rev) |
Metric threads range |
39kinds 0.2-14mm |
Inch threads range |
45kinds 2-72T.P.I |
Diametrical pitchesrange |
21kinds 44D.P. |
Module pitches range |
18kinds 0.3-3.5M.P. |
TAILSTOCK |
Dia.of tailstock sleeve |
50mm(2") |
Travel of tailstock sleeve |
120mm(4-3/4") |
Morse taper of tailstock sleeve |
No.4 Morse |
Cross adjustock |
±13mm(±1/2") |
MOTOR |
Power of main motor |
2.8/3.3kw(3.8/4.5HP)3PH |
Power of coolant pump |
0.1KW(1/8HP),3PH |
DIMENSION AND WEIGHT |
Overall dimension(L×W×H) mm |
1940×850×1300 |
1940×850×1320 |
Packing size(L×W×H)mm |
2060×900×1640 |
2060×900×1640 |
Net weight/Gross weight |
1500/1750 |
1550/1800 |
STANDARD ACCESSORIES |
- 200mm Three Jaw Chuck and Adapter
- 320mm Four Jaw Chuck and Adapter
- 300mm Face Plates
- Steady Rest
- Follow Rest
- Thread Chasing Dial
- Mt/6/4 Sleeve and MT 4 Center
- Oil Gun
- One set of Wrenches
- Operation Manual
|
SPECIAL ACCESSORIES |
1. 200mm Driving plate 2.Quick change Tool Post 3.Taper Turning Attachment |
This article is divided into
1
Page |