2. Working principle
This series of machines is a continuous pass-through type machine for automatically blasting plate steel components placed onto a roller conveyor. Work pieces with overall dimensions not exceeding the specifications can be blasted in a continuous operation. Each machine is provided with an integrated roller conveyor for powering the work pieces beneath the blasting wheels. The blast wheels are mounted above and below the conveyor at optimum angles for effectively blasting all exposed work piece surfaces.
The pass-through openings in the entry and exit vestibules are shrouded by wear resistant rubber curtains to limit the escape of stray abrasive. The exit vestibule is fitted with a high pressure fan powered blowing system and a rotary brush system for removing and recovering residual abrasive from the blasted work pieces. Loading and unloading operations are performed on conveyor extensions located at each end of the machine.
All shot blast machines include an integral abrasive recovery and cleaning system. After passing through the blast wheel, the abrasive from the blast cabinet, and the residual abrasive from the blasted work pieces removed by a high pressure fan powered blowing system and a rotary brush system will be directly collected together by screw conveyor, and send the mixed abrasive to the air wash separator to clean through the bucket elevator and rotary separating drum ,the cleaned abrasive is separated from the resulting dust and other contaminants, then stored in a hopper, ready for reuse. Collected contaminants are stored in a separate hopper for periodic disposal.
Effective cleaning of the shot blasting media is perhaps the determining factor in achieving a high blasting performance, low system wear, and short blasting times. An archimedic screw conveyor or a vibrating screening channel conveyor transports the shot blasting medium from the shot blasting chamber to a high performance sectioned air flow sepating unit.
The shot blasting media is first distributed via a cascade and regulated with adjustable separator flaps. it falls as a curtain and passes through a cleaning air stream, drawn by the the dust collector. The flow rate of the cleaning air stream is exactly adjustable to the different core sizes of the blasting media by air flow regulating valves.
Non-usable blasting media and dust are carried out of the media mixture while usable blasting media flows direct into the blasting media flows into the blasting media hopper. complete cleaning is ensured by integrated separators and cyclone units,also can be equipped with a highly efficient pulse-style backing-blowing dust-filter.
.
All machines utilize replaceable highly wear resistant materials in critical locations. All machine control systems are pre-piped and pre-wired. All machine dust exhaust ports are pre-piped to a central collection point, ready to be connected to an external dust collector or optionally, a fully integrated dry cartridge type dust collector can be provided.
Optional Features:
* Integrated Load/unload transfer Roller Conveyor :
The peripheral equipments is adapted to suit the need of the user,delivery of the workpieces to the entry side and their discharge from the exit side can done manually or automatically.seals on the entrance and exit vestibules prevent the escape of the shot particles.in the exit area is a roller conveyor with abrasive collection hopper where all residual abrasive is removed manually or with a cleaning device to then be reconditioned for reuse.
* Variable roller transporting speed system:
Sections ( except for C-sections) can be descaled from all sides in one single passage.adjustable thoroughput speeds and optionally adjustable abrasive throwing speeds and throughput quatities offer the following advantages:
l Easy adaptation of dwell periods and blast cleaning intensity to suit a specific type of workpiece
l Reduction of wearing
l Reduction of the shot consumption
* Option for residual abrasive removal:
Cartridge or bag type of dust collectors
A highly efficient filter-barrel pulse back – blowing dust abrasive recycling system
Pneumatic removal
Combined pneumatic/mechanical removal using compressed air and vertically adjustable rotating roller brushes.
Air and Rotary Brush Abrasive Recover System at Exit
A compensating flow air wash separator providing 90” of abrasive classification
A rotary screen scalping drim with secondary screen
Overhead abrasive storage hopper for abrasive
A highly efficient filter-barrel pulse back – blowing dust abrasive recycling system
Screw conveyor at the bottom of the hopper moves abrasive to the boot section of the elevator,elevator lifts the shot to the shot hopper after removing of dust.
Abrasive separation in gravity type with separating tip air wash system and and abrasive trip arrangement.
*Shot blasting system
Direct drives and the rugged hanger bearings,all assure maximum up time and lowest maintenance cost.
The unique arrangement of the blast wheels slightly tilted in the blasting direction and the best patterm geometry ensure
Even abrasive impingement to blast clean the workpieces from all sides
A thorough blast cleaning effect for perfectly cleaned workpieces.
* Electric control system
* Mechanical and electrical installtion
* Factory moderm support
* Inspection and mataintenance serice contracts
* Modernization of existing installtions
* User friendly PLC driven controls or normal push button controls
*Safe protecting system:
Safety ladders,platforms ( and optional platforms for wheel maintenance)
Emergency lighting system in tough up booth
Handrail or covers around all open pit